Preconcentration and separation of iron, zinc, cadmium and mercury, from waste water using Nile blue a grafted polyurethane foam

The present work describes a novel method for the incorporation of Nile blue A into polyurethane foam matrix. This foam material was found to be very suitable for the extraction of metal ions from aqueous solutions. The characterization of Nile blue A grafted foam and the effect of halide concentration, pH, shaking time, extraction isotherm and capacity have been investigated. This foam material was found to be suitable for the separation and preconcentration of iron (III), zinc (II), cadmium (II) and mercury (II) from waste water. The extraction was accomplished in (15-20) minutes. Iron was separated from acid medium (2-4 M HCl), zinc from (3-5 M HCl), cadmium from (4-6 M HCl) as thiocyanate complexes and mercury was separated from (1-2 M HCl) as chloride.     

Spectrophotometric estimation of ketotifen fumarate in pharmaceutical formulations

Four simple and sensitive spectrophotometric methods (A–D) for the determination of Ketotifen fumarate in bulk samples and pharmaceutical formulations are described. They are based on the formation of coloured species by the coupling of the diazotised sulphanilamide with the drug (method A, _max 520 nm) or by oxidizing it with excessN-bromo-succinimide and determining the consumed NBS with decrease in colour intensity of celestine blue (method B: _max 540 nm) or by the reduction of Folin-Ciocalteau reagent (method C: _max 720 nm) or by the formation of a chloroform-soluble, coloured ionassociation complex between the drug and Azocarmine G at pH 1.5 (method D: _max 540 nm). Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 1–10, 2–12, 4–28 and 2.5–25 g/ml for methods A–D, respectively. The validity of the proposed methods was tested by analysing pharmaceutical formulations containing KTF: the relative standard deviations were within ±1.0%. Recoveries were 98.9–100.2%.     

催化动力学荧光光度法测定痕量铜

在氨性介质中，铜对H2O2氧化次甲基蓝褪色反应有强烈催化作用。研究发现，次甲基蓝的氧化产物在紫外线照射下发出强荧光，据此建立一种测定痕量铜的催化动力学荧光光度法。本法检出限达0．02ng／mL，铜的质量浓度在0～6ng／mL范围内与相对荧光强度（△F）有良好线性关系。     

Dependence of the methylene selectivity on the composition of hydro-organic eluents for reversed-phase liquid chromatographic systems with alkyl bonded phases

Summary A theoretical treatment is presented which considers differences between the composition of the mobile phase and solvents that are incorporated into the bonded phase via preferential sorption. Equations are derived and used to analyze retention data for various homologs chromatographed under reversed-phase conditions using alkyl bonded phases and combinations of water-methanol, water-acetonitrile and watertetrahydrofuran as mobile phases. In the case of water-methanol the surface phase and bulk mobile phase compositions are similar. However, significant differences in composition between the two phases are observed when binary combinations of water-acetonitrile and water-tetrahydrofuran are used as the cluents.     

金纳米微粒作探针共振瑞利散射光谱法测定亚甲蓝

在pH为6.5~9.5的中性或弱碱性介质中, 金纳米微粒可与亚甲蓝(MB)阳离子靠静电引力及疏水作用力结合, 形成粒径较大的聚集体(平均粒径从12 nm增至20 nm), 这种聚集体的形成导致共振瑞利散射(RRS)强度显著增强, 最大散射峰位于371 nm. 在适当条件下, 散射强度(ΔI)与亚甲蓝浓度成正比. 该法具有高灵敏度, 将金纳米微粒作为测定亚甲蓝的高灵敏RRS探针, 对亚甲蓝的检出限为21.17 ng/mL, 该法简便， 快速， 且有较好的选择性, 可用于血液中亚甲蓝的测定.     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Rice husk ash as an adsorbent for methylene blue—effect of ashing temperature

Utilization of one waste material to control pollution caused by another is of high significance in the remediation of environmental problems. Rice husk, an abundantly available agricultural waste, can be used as a low cost adsorbent for dyes and heavy metals in effluent streams. The possible utilization of rice husk ash as an adsorbent for methylene blue dye from aqueous solutions has been investigated. Ash samples from husks of two origins were prepared at different temperatures and their physical, chemical spectroscopic and morphological properties were determined. XRD, FTIR and SEM were some of the techniques adopted for the characterization. The samples were also analyzed for bulk density, pH, nitrogen adsorption properties and lime reactivity. Experiments of methylene blue adsorption on the ash samples were conducted using batch technique and a comparative study was made. Results were analyzed using linear, Langmuir and Freundlich isotherms. The values of separation factor indicate that most of the ash samples do adsorb the dye molecules, but in varying quantities. Calcination at 900^∘C reduces the adsorption capacity of the ash to a great extent. Regression analysis shows that the experimental data fits both Langmuir and Freundlich isotherms for certain concentration limits. The adsorbate species are most probably transported from the bulk of the solution into the solid phase through intra-particle diffusion process. Kinetics of adsorption was found to follow pseudo second order rate equation with R ²∼ 0.99. The highest adsorption capacity (Q ₀) achieved is found to be ∼690 mg/g, which is even higher than the values reported for activated carbon from rice husk. The adsorption capacity of the ash samples are in good agreement with their surface area and pore volume.     

Characterization and properties of the copper(II/I) complexes of macrocyclic hexathiaether ligand [21]aneS6

The copper(II/I) complexes of hexathiaether macrocyclic ligand, 1,4,8,11,15,18-hexathiacyclohenicosane ([21]aneS₆), were synthesized, and characterized by electrochemical and spectroscopic techniques. Cyclic voltammetric studies indicate that Cu([21]aneS₆)^2+/+ forms a reversible one-electron redox couple. The electrochemical potential obtained for Cu([21]aneS₆)^2+/+ (E^f = 0.89 V, against SHE) was found to be the highest potential reported to date for a Cu^2+/+ macrocyclic system in aqueous solution. By employing the Nernst equation, we can infer that the practical upper limit for formal potential of Cu(II/I)L systems maybe close to this high value. Stability constant data obtained for these complexes indicate that Cu([21]aneS₆)⁺is 12 orders of magnitude greater in stability than that of Cu([21]aneS₆)²⁺ indicating the favorable nature of this large macrocyclic ligand towards formation of Cu(I) complexes over Cu(II) complexes. Crystal structure of Cu([21]aneS₆)⁺ ( Fig. 2) shows that four sulfurs adjacent to one another are coordinated to Cu⁺ ion in this complex. Bond angles and distances calculated for the crystal indicate that it is a distorted tetrahedron, a geometry commonly encountered by Cu(I) complexes. This is the first report of synthesis and characterization of a metal coordinated [21]aneS₆ complex.     

Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

普鲁士蓝薄膜的电积法制备及其化学组成

在金属和石墨基底电极上用恒电位沉积法制备出普鲁士蓝(PB)薄膜,研究了影响膜生长的多种因素;观察到PB膜的电化学活性。用红外光谱及电子能谱对膜的化学组成作了分析,结果表明,最初制备的膜为不溶性PB:Fe_4[Fe(CN)_6]_3,在含K~+的电解质溶液中经电化学反应后膜部分转变为可溶性PB:KFeFe(CN)_6,由此确定了PB膜的电化学反应式。